Search This Supplers Products:PET Preform MouldInjection Molding MachinePlastic MouldSemi-automatic Blow Molding MachineAutomatic Blow Molding Machine
- Home
- About us
- Products
- Best selling injection molding machine
- Preformed preform injection mold
- Production injection molding machine
- All kinds of injection plastic molds
- Semi-Automatic Blow Moulding Machines
- Automatic Extrusion Blow Molding Machines
- Produce cheap laser marking machine
- Custom plastic preform injection mold
- Other injection mold forming machines
- Injection Disposable Plastic Tableware Mould
- Faqs
- News
- Certificate
- Contact us
Proper recycled material mix rate depends on the recycled material quality, using grade
time2020/08/11
- Proper recycled material mix rate depends on the recycled material quality, using grade, and product's demand characteristics, so cannot be completely defined. Therefore, decision of the limit of the recycled material ratio
should be made after sufficient check has been done.
Review method of recycling
Proper recycled material mix rate depends on the recycled material quality, using grade, and product's demand
characteristics, so cannot be completely defined. Therefore, decision of the limit of the recycled material ratio
should be made after sufficient check has been done. Do not mix oil or trash when recycling sprue and runner.
Also, molded products made for testing or requirement proposal are not suitable for recycling because the
physicality is unsteady. Figure 4-12 indicates the flow chart of the recycling method.
Figure 4-12 Flow chart of recycling method